17 August 2012, 01:07 PM
2013 Dodge SRT Viper GTS Launch Edition will make its first official appearance at Pebble Beach this weekend. The unveiling of the new limited-edition model will evoke memories of the past Viper Coupes.
The new Dodge has the emblematic GTS Blue paint and dual Bright White stripes. And this is exactly what is exclusive to the Launch Edition models. The bright white stripes are running the length of the all-new exterior which incorporates the symbolic Viper styling cues.
To sum up, this Amer
09 April 2012, 12:36 PM
It has been less than one week since Chrysler Group announced the release of the all new two models of 2013 Dodge Viper SRT and Viper SRT GTS.
Both models were developed by Street and Racing Technology (SRT®) and can offer nothing less than superb performance and excitement!
In fact this is the fifth generation of the iconic two-seat, American-built supercar. And now we can see its evolution, which can be effortlessly seen in the high-quality work of the designer and engineers, as well as
04 April 2012, 08:13 PM
Dodge has announced the two new models - SRT® Viper and SRT Viper GTS. Both are developed by Street and Racing Technology (SRT®) and come with superb performance, superior craftsmanship, new technologies and creature comforts.
This is the fifth generation of the iconic two-seat, American-built supercar has been deliberately evolved to incorporate superior craftsmanship, a host of new technologies and ergonomic improvements while respecting its visceral legacy of outright performance.
Some
31 January 2012, 06:04 PM
Street & Racing Technology would be teasing the new 2013 Dodge Viper on Facebook, but there is one condition – 10 000 likes before 1st February. It is pretty good advertising for Chrysler, Jeep and Dodge.
Still, the task wasn’t so hard and the page has even more likes, that’s why the teaser was released even earlier. It is hard to say anything about the car, because we can see only several lines, which are most likely from a hand drawn picture, instead of a real car.
The new 2013 Dodge
14 December 2011, 02:52 PM
More news from Chrysler Group LLC is coming today. Chrysler has announced that it will reopen its Conner Avenue Assembly Plant in Detroit for the production of the next generation SRT Viper. The Conner facility was vacant since the end of the production of the Dodge Viper in July 2010. The good news is that from Chrysler has also confirmed that in the late 2012 a next generation Viper will return on the market as a 2013 model. To be more precise Conner Avenue will begin the manufacturing of the
29 November 2011, 05:34 PM
In order to go into details about this ZAKSPEED Dodge Viper, we have to review some history about it. Firstly in 2010 the current owner acquired the Viper presented here. Obviously this Zakspeed racing car is stunningly racing-tuned. This tuning was made possible because the Heurich Classics plant (founded in 2006 in the Bavarian Zeitlofs-Rupboden specializing in custom work) was commissioned to convert this Viper. The aim here was to bring this Viper back to the streets and let it shine on an o
22 October 2010, 05:27 PM
How it sounds to replace an ordinary 3.5 liter V6 with mighty 8.3 liter V10 from Dodge Viper? Superb, of course. Here is the „mysterious” Chrysler 300C with such engine and some other goodies including - Eibach adjustable coilovers, a T56 Tremec six-speed manual transmission, a custom Aeromotive fuel tank, and a C&R racing radiator.
The pride owner - Derek Ekins did the whole work by himself except the wiring harness and computer reflash.
"I built it knowing about the power and trying
05 October 2010, 06:00 PM
Past weekend, at the 11th Annual Viper Club of America’s Owners Invitational that took place in Salt Lake City, Dodge has premiered its next-generation Viper supersports ride along with the all-new Viper logo. Unfortunately, the 2012 Dodge Viper was presented in ultra tight security, without any cameras or cell phones, but the skilful guys at dragTimes.com managed to provide us few shots of the car under a cover and the new logo.Ivan Ho, President of the Viper Club of America’s South Florida Cha
07 July 2010, 04:40 PM
Last week, at the Conner Avenue Assembly Plant in Detroit, Dodge brand’s President and CEO Ralph Gilles and the facility manager Shelly Brown Gordon welcomed more than 400 hundred loyal Viper owners and fans to a special unveiling ceremony, featuring the ultimate factory customized 2010 Dodge Viper coupe and the car’s proud new owner D'Ann Rauh.
Extremely special in both, styling and history, the one-of-a-kind Viper benefits from unique bronzed-gold exterior paintwork with airbrushed layouts
08 June 2010, 10:21 AM
If you think that you have already saw everything from this generation Dodge Viper as it is in its last year of production, you will probably have to reconsider that. The American sporty brand is surprising us with the unwrapping of three new exclusively styled 2010 Viper SRT10 rides as a part of its "Dealer Exclusive Program."
This program is available exclusively for dealers who sold sufficient number of Vipers and allows them to design their own unique edition ride. Limited to only 50
13 July 2009, 11:18 AM
Chrysler Group LLC announced that production will continue for the legendary Dodge Viper SRT10. Originally slated to cease production in December 2009, the Chrysler Group Conner Avenue Assembly Plant — the exclusive home of Dodge Viper production since 1995 — will continue to build the V-10 powered sports car. Chrysler Group is no longer pursuing a sale of the Viper business assets.
“The Dodge Viper has successfully captured the hearts and imagination of performance enthusiasts around the gl
04 November 2008, 04:18 PM
Ever the innovator, Kumho is launching the world’s first ultra low profile 15 Series tyre at the 2008 SEMA (Speciality Equipment Market Association) Show in Las Vegas this week (November 4-7).
The 385/15ZR22 size ECSTA SPT KU31 has been developed as a conversion option for such exotic sports cars as the Ferrari F430, Dodge Viper, and Corvette Z06.
The company has used cutting-edge computer simulation technology to optimise the sidewall structure, thereby preventing the formation of standing